Kenmore 9083, 46-9083 Refrigerator Water Filter Replacement

The Kenmore 9083 replaces two older filter codes, 9020 and 9030, that appear on a wide range of Kenmore side-by-side models including the Coldspot 106 series. NSF 42, 53, and 401 certified to reduce chlorine-resistant cysts, lead, asbestos, sediment, and over 50 contaminants, it also removes up to 99% of PFOA and PFOS, two fluorinated compounds increasingly found in municipal water supplies. The push-button eject installation is one of the simpler swaps in the Kenmore lineup. 

One specification worth knowing: the 9083 is rated for 200 gallons with a PID-equipped refrigerator or 100 gallons without one, so confirming whether the refrigerator has a PID filter monitoring system before ordering is worth doing.

Why Choose the Kenmore 9083 Water Filter

The Kenmore 9083 is NSF 42, 53, and 401 certified, independently tested across aesthetic, health, and emerging contaminant categories. The 9083 covers a broader contaminant list than most standard Kenmore filters, including PFOA and PFOS reduction. Here is what the 46-9083 specifically addresses:

• PFOA and PFOS reduction up to 99%, emerging fluorinated compounds not covered by most standard filters
• Chlorine-resistant cysts, Cryptosporidium and Giardia
• Lead and asbestos
• Sediment and particulates
• Chlorine taste and odor

Kenmore 9083 Filter Specifications

• Product Name: Kenmore 9083, 46-9083 Refrigerator Water Filter
• Certification: NSF 42, 53, and 401
• Filter Capacity: 200 gallons with PID, 100 gallons without PID
• Filter Life: Up to 6 months
• Flow Rate: 0.5 GPM
• Operating Temperature: 33 to 100 degrees Fahrenheit
• Working Pressure: 30 to 120 PSI
• Dimensions: 11.875 inches L x 2.5 inches W
• Color: White with teal label accents
• Installation Type: Push-button eject, tool-free
• Compatible Fridge Types: Kenmore and Kenmore Coldspot 106 series side-by-side refrigerators and select Amana, Ikea, and Maytag models
• Brand: Kenmore

Easy Installation for the Kenmore 46-9083 Water Filter

The 9083 uses a push-button eject system. No tools required. Here is how the swap works:

1. Locate the filter housing inside the upper right area of the refrigerator compartment
2. Press the eject button on the filter housing to release the old filter
3. Pull the old filter straight out and discard
4. Remove the protective cap from the new Kenmore 9083 filter
5. Swap the decorative cap from the old filter onto the new one if required by the specific model
6. Push the new filter firmly into the housing until it clicks securely into place
7. Run water through the dispenser to purge air from the water line before drinking
8. Reset the filter indicator light per the refrigerator user guide

When to Replace the Kenmore 46-9083 Filter

Replace the Kenmore 9083 refrigerator water filter when any of the following occur:

• Every 6 months or 200 gallons with PID, 100 gallons without PID, whichever comes first
• Water picks up a flat taste or faint chemical odor
• Dispenser flow drops noticeably
• The filter indicator light activates on the refrigerator panel

Key Benefits

• NSF 42, 53, and 401 certified, covering aesthetic, health, and emerging contaminant reduction
• Reduces PFOA and PFOS up to 99%, coverage beyond most standard Kenmore filters
• Replaces older 9020 and 9030 filter codes on Kenmore Coldspot 106 series models
• Push-button eject installation, one of the simpler swaps in the Kenmore filter lineup
• White with teal label for easy identification at replacement time
• EDR3RXD1 equivalent, compatible with select Amana, Ikea, and Maytag refrigerators

FAQs

What makes the Kenmore 9083 different from other Kenmore filters?

The 9083 covers a broader contaminant list than most standard Kenmore filters, including PFOA and PFOS reduction up to 99% and chlorine-resistant cyst coverage, both of which most standard filter models do not address. It also replaces the older 9020 and 9030 filter codes on Kenmore Coldspot 106 series models. The capacity varies depending on whether the refrigerator has a PID monitoring system, which is worth confirming before ordering.

What part numbers does the Kenmore 9083 replace?

The 9083 directly replaces EDR3RXD1, 4396710, 4396841, 4396711, 4396842, 8212650, 9020, 9020B, 9030, 9030B, 9920, 9953, W10121145, W10121146, W10754687, W10776411, AP5983563, EAP11722128, and PS11722128. Check the label on the current filter to confirm the correct replacement before ordering.

Is the Kenmore 9083 compatible with other refrigerator brands?

Yes. The 9083 is also used on various Amana, Ikea, Jenn-Air, KitchenAid, Maytag, and Whirlpool refrigerators that use the EDR3RXD1 filter code. Always verify the refrigerator model number before ordering to confirm compatibility.

What is the difference between 200 gallon and 100 gallon capacity for the 9083?

The 9083 is rated for 200 gallons in refrigerators equipped with a PID filter monitoring system and 100 gallons in refrigerators without one. PID stands for product identification and refers to the filter monitoring system that tracks usage. Check the refrigerator user guide to confirm whether the specific model has a PID system before ordering.

How often should the Kenmore 9083 filter be replaced?

Every 6 months or at the rated gallon capacity, whichever comes first. PID-equipped refrigerators are rated for 200 gallons. Non-PID models are rated for 100 gallons. If water taste changes or dispenser flow drops before the scheduled replacement, replace sooner.

Is this filter sold as a single pack?

Yes. This listing covers the Kenmore 9083, 46-9083 Refrigerator Water Filter as a single pack. Check the product listing for multi-pack options if ordering replacements for an extended period.